Detroit Diesel
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 14 (CPC) MCM System ID/MCM_C01 Not Received or Stopped Arriving
Posted by PerDiezel Solutions on
DESCRIPTION:MCM message not received or has stopped arriving. MONITORED PARAMETER:CAN communication TYPICAL ENABLING CONDITIONS:Always enabled MONITOR SEQUENCE:None EXECUTION FREQUENCY:Always enabled TYPICAL DURATION:Two seconds DASH LAMPS:1. MIL2. CEL ENGINE REACTION:None NOTE: If there are any battery related faults, repair those first. PROBABLE CAUSES:1. If any engine components have been programmed recently and are inactive, clear then and test drive to see if they return.2. Turn ignition off for 5 minutes (leave batteries connected) and turn back on to see if they went inactive.3. Measure resistance across MCM 12-pin connector at pins 13 and 19. If less than 5 ohms, replace the...
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 17 (CPC) No ACM Communication – Pre Warning
Posted by PerDiezel Solutions on
NOTE: This fault indicates an interruption in ACM/MCM communication. NOTE: Follow code for 1231-9.
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 17 (MCM) No ACM Communication – Pre Warning
Posted by PerDiezel Solutions on
NOTE: This fault indicates an interruption in ACM/MCM communication. NOTE: Follow code for 1231-9.
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 18 (CPC) No ACM Communication – Warning
Posted by PerDiezel Solutions on
NOTE: This fault indicates an interruption in ACM/MCM communication. Follow service procedure for MCM SPN 1231 FMI 9 (ACM Message Not Received or has Stopped Arriving).
Detroit DD13 EPA10 (2010-13) Fault Code: SPN 625 FMI 18 (MCM) No Aftertreatment Control Module (ACM) Communication – Warning
Posted by PerDiezel Solutions on
NOTE: This fault indicates an interruption in ACM/MCM Communication. NOTE: Follow code for 1231-9.
