Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 6 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #6. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #6. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #6 is faulty and must be replaced.2) Disconnect the...

Fault Condition: If the information transmitted from the VGT SRA is above range, FMI 0 will set. Possible repairs: 1) If code SID 27 is not set, wiggle the harness and connectors to try to set the code. Visually inspect the VGT SRA connector for poor connections.2) If the FMI is 0 (Data High) or 2 (Data Erratic), replace the VGT SRA assembly and retest the system. Volvo All Engines (2004 Emissions) Fault Code: SID 27 FMI 2 Variable Geometry Turbocharger Smart Remote Actuator Volvo All Engines (2004 Emissions) Fault Code: SID 27 FMI 4 Variable Geometry Turbocharger Smart Remote...