Volvo Engine D13F Fault Code: SID 22 FMI 2 Timing Sensor, Crank
CONTROL UNIT:
Engine ECU
DETECTION CONDITIONS:
The engine control unit (E-ECU) registers intermittent signal loss or signal error.
SYMPTOM:
1. Engine runs rough/varying engine speed.
2. Misfiring.
3. Engine is difficult to start, only after a long time of cranking.
4. Fuel consumption higher than normal.
POSSIBLE CAUSES:
1. Electric interference on speed signal.
2. Loose connection.
3. Poor insulation or defective cable.
4. Incorrectly installed sensor.
5. Defective sensor.
6. Damaged gear teeth on flywheel.
Volvo Engine D13F Fault Code: SID 21 FMI 8 Engine Position
Volvo Engine D13F Fault Code: SID 21 FMI 3 Engine Position
Volvo Engine D13F Fault Code: SID 21 FMI 2 Engine Position
Volvo Engine D13F Fault Code: SID 6 FMI 7 Injector #6
Volvo Engine D13F Fault Code: SID 6 FMI 5 Injector #6
Volvo Engine D13F Fault Code: SID 6 FMI 3 Injector #6
