Volvo
Volvo All Engines (2010 Emissions) Fault Code: SPN 3064 FMI 11 PID: PPID 326 Aftertreatment DPF Soot Level
Posted by PerDiezel Solutions on
This function is used to determine the level of soot in the diesel particulate filter (DPF). This is done by using four different signal/parameters; estimated driving distance since last aftertreatment DPF regeneration, the time since last regeneration, fuel consumption and the aftertreatment DPF pressure. When this diagnostic trouble code (DTC) is set the filter needs servicing due to high level of soot or the aftertreatment DPF regeneration process does not function properly. Conditions for diagnostic trouble code (DTC):1) Critically high soot load2) Aftertreatment diesel particulate filter (DPF) soot load ratio more than 170 % Observable symptoms1) Low Power Probable cause1)...
Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 11 PID: PPID 348 Aftertreatment Intake Nox
Posted by PerDiezel Solutions on
The NOx sensor measures the amount of NOx in the exhaust system. The NOx sensor is connected in the J1939-2 data link. This diagnostic trouble code (DTC) indicates a NOx monitoring failure. For example; NOx sensor short- or open circuit, NOx sensor removed, NOx sensor missing signal. Observable symptoms1) None Probable cause1) Sensor not mounted in exhaust stream2) Software3) NOx sensor Volvo All Engines (2010 Emissions) Fault Code: SPN 3064 FMI 11 PID: PPID 326 Aftertreatment DPF Soot Level Volvo All Engines (2010 Emissions) Fault Code: SPN 3064 FMI 10 PID: PPID 326 Aftertreatment DPF Soot Level Volvo All Engines...
Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 12 PID: PPID 348 Aftertreatment Intake NOx
Posted by PerDiezel Solutions on
The NOx sensor measures the amount of NOx in the exhaust system. The NOx sensor is connected in the J1939-2 data link. This diagnostic trouble code (DTC) indicates a NOx monitoring failure. For example; NOx sensor short- or open circuit, NOx sensor removed, NOx sensor missing signal. Conditions for diagnostic trouble code (DTC):1) Abnormal value Observable symptoms1) None Probable cause1) Dosing failure2) Oil contamination3) NOx sensor Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 11 PID: PPID 348 Aftertreatment Intake Nox Volvo All Engines (2010 Emissions) Fault Code: SPN 3064 FMI 11 PID: PPID 326 Aftertreatment DPF Soot...
Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 13 PID: PPID 348 Aftertreatment Intake NOx
Posted by PerDiezel Solutions on
The NOx sensor measures the amount of NOx in the exhaust system. The NOx sensor is connected in the J1939-2 data link. This diagnostic trouble code (DTC) indicates a NOx monitoring failure. For example; NOx sensor short- or open circuit, NOx sensor removed, NOx sensor missing signal. Conditions for diagnostic trouble code (DTC):1) Internal NOx sensor heating failure Observable symptoms1) NOx value not readable with Tech tool Probable cause1) Software2) Internal fault in component Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 12 PID: PPID 348 Aftertreatment Intake NOx Volvo All Engines (2010 Emissions) Fault Code: SPN 3216...
Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 14 PID: PPID 348 Aftertreatment Intake NOx
Posted by PerDiezel Solutions on
The NOx sensor measures the amount of NOx in the exhaust system. The NOx sensor is connected in the J1939-2 data link. This diagnostic trouble code (DTC) indicates a NOx monitoring failure. For example; NOx sensor short- or open circuit, NOx sensor removed, NOx sensor missing signal. Conditions for diagnostic trouble code (DTC):1) Incorrect value, Voltage supply Observable symptoms1) None Probable cause1) Ignition key left on for a extended time with the engine off2) Poor ground connection3) Voltage supply interrupted4) Jump starting5) Battery cable connections6) Battery7) Alternator8) NOx sensor Volvo All Engines (2010 Emissions) Fault Code: SPN 3216 FMI 13...
