Cummins ISB CM850 (2003-06) Fault Code: 412 PID: SID 250 SPN: 608 FMI: 2 SAE J1587/J1922 data link – can not transmit. Communication between the ECM and another device on the J1587/J1922 data link has been lost. This fault occurs whenever the ECM starts communicating with any other device with the J1587/J1922 data link and then can no longer transmit on the data link. Possible causes could be the following: Unplugthe electronic service tool before keying off the ECM, the J1587/J1922 data link having an intermittent electrical problem, and the ECM (or another J1587/J1922 device) tying up communications because of...

Cummins ISB CM850 (2003-06) Fault Code: 415 (Sensor) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data Valid but Below Normal Operational Range – Most Severe Level. Oil pressure signal indicates oil pressure is below the engine protection critical limit. Possible causes: 1)Low oil pressure2)Incorrect oil level. Possible repairs: 1)Replace the pressure sensor. Cummins ISB CM850 (2003-06) Fault Code: 412 PID: SID 250 SPN: 608 FMI: 2 SAE J1587/J1922 data link – can not transmit. Communication between the ECM and another device on the J1587/J1922 data link has been lost. Cummins ISB CM850 (2003-06) Fault Code: 387...

Cummins ISB CM850 (2003-06) Fault Code: 415 (Switch) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data Valid but Below Normal Operational Range – Most Severe Level. Oil pressure signal indicates oil pressure is below the engine protection critical limit. Possible causes: 1)Low oil pressure2)Incorrect oil level3)Damaged oil pressure switch4)Engine harness shorted to ground. Possible repairs: 1)Replace the oil pressure switch.2)Repair or replace the engine harness.3)Replace the ECM. Cummins ISB CM850 (2003-06) Fault Code: 415 (Sensor) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data Valid but Below Normal Operational Range – Most Severe...

Cummins ISB CM850 (2003-06) Fault Code: 415 (Switch) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data Valid but Below Normal Operational Range – Most Severe Level. Oil pressure signal indicates oil pressure is below the engine protection critical limit. Possible causes: 1)Low oil pressure2)Incorrect oil level3)Damaged oil pressure switch4)Engine harness shorted to ground. Possible repairs: 1)Replace the oil pressure switch.2)Repair or replace the engine harness.3)Replace the ECM. Cummins ISB CM850 (2003-06) Fault Code: 415 (Sensor) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data Valid but Below Normal Operational Range – Most Severe...

Cummins ISB CM850 (2003-06) Fault Code: 418 (Auto) PID: 97 SPN: 97 FMI: 15 Water-In-Fuel Indicator – Data Valid but Above Normal Operational Range – Least Severe Level. Water has been detected in the fuel filter. The water-in-fuel is integrated into the fuel filter. It is automatically replaced whenever the fuel filter is replaced. For marine applications the sensor is not integrated into the fuel filter and is a serviceable item. Possible repairs: 1)Drain the water from the fuel filter. Cummins ISB CM850 (2003-06) Fault Code: 415 (Switch) PID: 100 SPN: 100 FMI: 11 Engine Oil Rifle Pressure – Data...