Volvo
Volvo All Engines (2004 Emissions) Fault Code: SID 18 FMI 5 Water in Fuel Valve
Posted by PerDiezel Solutions on
Fault Condition: FMI 5 indicates that an open circuit has beendetected in the Water in Fuel Valve Circuit. Possible repairs: Turn the ignition key OFF first. 1) If code SID 18 is not set, wiggle the harness and connectors to try to set the code. Visually inspect the Water in Fuel Valve harness connector and wires for frayed or loose connections.2) Remove fuse 2 at the Engine Power Distribution Module and disconnect the Water in Fuel Valve Relay connector. Check for continuity between pin B at fuse 2 in the Engine Power Distribution Module and pin 4 of the Water...
Volvo All Engines (2004 Emissions) Fault Code: SID 2 FMI 12 Fuel Injector Unit #2
Posted by PerDiezel Solutions on
Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 2 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #2. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #1. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #2 is faulty and must be replaced.2) Disconnect the...
Volvo All Engines (2004 Emissions) Fault Code: SID 2 FMI 3 Fuel Injector Unit #2
Posted by PerDiezel Solutions on
Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 2 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #2. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #1. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #2 is faulty and must be replaced.2) Disconnect the...
Volvo All Engines (2004 Emissions) Fault Code: SID 2 FMI 5 Fuel Injector Unit #2
Posted by PerDiezel Solutions on
Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 2 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #2. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #1. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #2 is faulty and must be replaced.2) Disconnect the...
Volvo All Engines (2004 Emissions) Fault Code: SID 2 FMI 7 Fuel Injector Unit #2
Posted by PerDiezel Solutions on
Fault Condition: If the Engine Management System (EMS) Module detects a fault in the electrical circuit while attempting to operate the Fuel Injector Unit, the Electronic Malfunction Lamp (EML) will turn ON and code SID 2 will set. Possible repairs: Turn the ignition switch OFF first. 1) Disconnect the harness electrical connector from Fuel Injector Unit #2. Check for continuity between the pins 1 and 2 of the Fuel Injector Unit #1. If the resistance is NOT between 0.9-5.2 Ohms at 68°F (20°C) or 1.5-5.8 Ohms at 218°F (103°C), Fuel Injector #2 is faulty and must be replaced.2) Disconnect the...
