NOTE: This code sets when the common powertrain controller (CPC) detects the voltage on the sensor supply circuits is out of range.

DESCRIPTION:
Remote accelerator pedal supply voltage circuit failed low.

MONITORED PARAMETER:
Remote accelerator pedal voltage.

TYPICAL ENABLING CONDITIONS:
Always on

MONITOR SEQUENCE:
Key on

EXECUTION FREQUENCY:
None

TYPICAL DURATION:
None

DASH LAMPS:
CEL

ENGINE REACTION:
Idle only

VERIFICATION:
1. Ignition key
2. Cycle on

POSSIBLE CAUSES:
1. Remote accelerator pedal assembly.
2. Circuit fault.
3. Fault within the CPC.
4. Improper configuration of the CPC.

NOTE: This code always indicates to replace the MCM.