DESCRIPTION:
This code is not configured for NAFTA applications. If this code is Active, CPC configuration is incorrect.

MONITORED PARAMETER:
Engine oil level signal from MCM.

TYPICAL ENABLING CONDITIONS:
Not Enabled

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
None

TYPICAL DURATION:
Two Seconds

DASH LAMPS:
CEL

ENGINE REACTION:
None

VERIFICATION:
Key ON, engine OFF.

NOTE: If 100-1 and 100-3 are both active, work on repairing 100-3 first.

NOTE: If 100-1 and 100-4 are both active, work on repairing 100-4 first.

PROBABLE CAUSES:
1. High oil level, check for fuel or coolant entering systems.
2. Oil level sensor connector/harness.
3. Oil level sensor.
4. Oil pressure fluctuating.