Cummins ISB CM850 (2003-06) Fault Code: 958 PID: 27 SPN: 2795 FMI: 2 VGT Position Sensor – Data erratic, intermittent, or incorrect. Intermittent variable geometry turbocharger (VGT) position information is being received by the electronic control module (ECM).
This fault code is caused by an internal failure of the variable geometry turbocharger (VGT) position sensor. This failure causes erratic readings of the variable geometry turbocharger (VGT) position. The troubleshooting information for fault code 958 is the same as fault code 1229. Refer to fault code 1229 for the fault code troubleshooting information.
Possible repairs:
1)Replace the turbocharger position sensor.
2)Replace the ECM.
Cummins ISB CM850 (2003-06) Fault Code: 957 PID: 27 SPN: 27 FMI: 2 EGR Valve Position – Data erratic, intermittent, or incorrect. Intermittent EGR position information is being received by the electronic control module (ECM).
Cummins ISB CM850 (2003-06) Fault Code: 951 PID: 166 SPN: 166 FMI: 2 Cylinder power imbalance between cylinders. A power imbalance between cylinders was detected by the ECM.
Cummins ISB CM850 (2003-06) Fault Code: 784 PID: SPN: 1590 FMI: 2 Loss of communication with adaptive cruise control. The ECM triggers this fault when the ?heartbeat? signal from the data bus is not received.
Cummins ISB CM850 (2003-06) Fault Code: 779 PID: SID 51 SPN: 703 FMI: 11 Auxiliary Equipment Sensor Input #3 (OEM Switch) – Root Cause Not Known.
Cummins ISB CM850 (2003-06) Fault Code: 778 PID: SID 64 SPN: 723 FMI: 2 Engine Speed Sensor (Camshaft) Error – Data Erratic, Intermittent, or Incorrect. The ECM has detected an error in the camshaft position sensor signal.
Cummins ISB CM850 (2003-06) Fault Code: 757 PID: SPN: 611 FMI: 11 Engine Control Module Data Lost – Condition Exits. Severe loss of data from the ECM.
