The idle shutdown timer is intended to improve fuel economy by limiting idling time. The idle shutdown timer is a customer specified parameter that may be programmed for any period from 3 to 1440 minutes. The timer is activated when all of the following conditions are met regardless of the position of the parking brake: •The vehicle speed is zero.•The engine is not in cold mode or dedicated PTO mode.•The engine is not under load. The timer can be reset by moving the vehicle or the timer can be reset by quickly depressing the accelerator pedal and releasing the accelerator...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid electrical short circuit. – A short circuit to battery voltage. CAT 3126E Fault Code: 105-04 PID: Flash Code 38 SPN: FMI: Intake Manifold Air Temperature Sensor Short Circuit CAT 3126E Fault Code: 105-03 PID: Flash Code 38 SPN: FMI: Intake Manifold Air Temperature Sensor Open Circuit CAT 3126E Fault Code: 84-10 PID: Flash Code 36 SPN: FMI: Vehicle Speed Rate of Change CAT 3126E Fault Code: 84-08 PID: Flash Code...

A Customer Specified Parameter or a System Configuration Parameter requiring programming has not been programmed. CAT 3126E Fault Code: 30-13 PID: Flash Code 29 SPN: FMI: PTO Throttle Sensor Calibration CAT 3126E Fault Code: 30-08 PID: Flash Code 29 SPN: FMI: Invalid PTO Throttle Signal CAT 3126E Fault Code: 91-13 PID: Flash Code 28 SPN: FMI: Throttle Sensor Calibration CAT 3126E Fault Code: 110-04 PID: Flash Code 27 SPN: 110 FMI: 4 Coolant Temperature Sensor Short Circuit CAT 3126E Fault Code: 110-03 PID: Flash Code 27 SPN: 110 FMI: 3 Coolant Temperature Sensor Open Circuit CAT 3126E Fault Code: 108-04...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector solenoid. CAT 3126E Fault Code: 190-00 PID: Flash Code 35 SPN: 190 FMI: 15 Engine Overspeed Warning CAT 3126E Fault Code: 190-11 PID: Flash Code 34 SPN: FMI: No Pattern on Engine Speed/Timing Sensor #1 CAT 3126E Fault Code: 190-02 PID: Flash Code 34 SPN: FMI: Loss of RPM Signal on Engine Speed/Timing Sensor #1 CAT 3126E Fault Code: 64-11 PID: Flash Code 34 SPN: FMI: No Pattern on Engine...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector solenoid. CAT 3126E Fault Code: 84-02 PID: Flash Code 36 SPN: FMI: Invalid Vehicle Speed Signal CAT 3126E Fault Code: 190-00 PID: Flash Code 35 SPN: 190 FMI: 15 Engine Overspeed Warning CAT 3126E Fault Code: 190-11 PID: Flash Code 34 SPN: FMI: No Pattern on Engine Speed/Timing Sensor #1 CAT 3126E Fault Code: 190-02 PID: Flash Code 34 SPN: FMI: Loss of RPM Signal on Engine Speed/Timing Sensor #1...