Conditions Which Generate This Code: This condition indicates an internal ECM problem. The vehicle needs a new ECM. CAT 3406E (Prefix 5DS or 1LW) Fault Code: 51 PID: 168 SPN: FMI: 2 ECM Battery Power Intermittent CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PID: 71 SPN: FMI: 14 PTO Shutdown CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PID: 71 SPN: FMI: 1 Idle Shutdown CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PID: 100 SPN: FMI: 11 Very Low Oil Pressure CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PID: 100 SPN: FMI: 1...

This condition indicates that the SAE J1939 Data Link is not communicating correctly. Probable Causes: 1) ECM Connection/Harness2) Another device on the J1939 is causing problems (ABS, VORAD, Cab controller, etc…)3) Wiring from data link connector to ECM CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 253 SPN: FMI: 11 Check Transmission Customer Parameters CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 253 SPN: FMI: 2 Check Customer or System Parameters CAT 3406E (Prefix 5DS or 1LW) Fault Code: 53 PID: 254 SPN: FMI: 12 ECM Fault CAT 3406E (Prefix 5DS or 1LW) Fault Code: 51...

This condition indicates that the “Transmission Style” parameter is programmed to the Eaton Top 2 and any one of the following parameters are not programmed: •”Auxiliary Output 2″ (Multi-Function Output #2) is not programmed to “Shift Solenoid”.•”Auxiliary Output 3″ (Multi-Function Output #3) is not programmed to “Lockout Solenoid”.•”Gear Ratios” not programmed Probable Causes: Program the “Transmission Style” parameter that is Eaton Top 2 to the correct setting. If an Eaton Top 2 Transmission is not used, program the correct “Transmission Style” parameter to the correct setting. CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 253 SPN: FMI: 2...

Conditions Which Generate This Code: This condition indicates a customer specified parameter or a system configuration parameter that requires programming has not been programmed. Probable Causes: 1) New ECM on vehicle, needs to be programmed2) Current ECM programmed incorrectly3) ECM Connection/harness CAT 3406E (Prefix 5DS or 1LW) Fault Code: 53 PID: 254 SPN: FMI: 12 ECM Fault CAT 3406E (Prefix 5DS or 1LW) Fault Code: 51 PID: 168 SPN: FMI: 2 ECM Battery Power Intermittent CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PID: 71 SPN: FMI: 14 PTO Shutdown CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47...

This condition indicates that the SAE J1922 data link is not communicating correctly. Probable Causes: 1) ECM Connection/Harness2) Another device on the J1939 is causing problems (ABS, VORAD, Cab controller, etc…)3) Wiring from data link connector to ECM CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 231 SPN: FMI: 11 J1939 Data Link Fault CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 253 SPN: FMI: 11 Check Transmission Customer Parameters CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PID: 253 SPN: FMI: 2 Check Customer or System Parameters CAT 3406E (Prefix 5DS or 1LW) Fault...