25% Discount for payments with Crypto Currency



Allison 1000 & 2000 Gen 5 Fault Code:P0607 Control Module Performance

Posted by PerDiezel Solutions on

CIRCUIT DESCRIPTION:
The TCM is equipped with an internal accelerometer used for Load Based Shift Scheduling (LBSS) and a variety of other purposes. This diagnostic test reports when the accelerometer is malfunctioning.

ACTION TAKEN WHEN THE DTC SETS:
1. The TCM does not illuminate the CHECK TRANS light.
2. DTC is stored in TCM history.
3. LBSS estimates are calculated based on other transmission parameters besides accelerometer data.

CONDITIONS FOR CLEARING THE DTC:
Use the diagnostic tool to clear the DTC from the TCM history. The TCM automatically clears the DTC from the TCM history if the vehicle completes forty warm-up cycles without the DTC recurring.

DIAGNOSTIC AIDS:
DTC P0607 may be caused by:
1. Defective TCM.
2. Error in TCM installation angle learning procedure.

Allison 1000 & 2000 Gen 5 Fault Code:P0604 Control Module Random Access Memory (RAM)
Allison 1000 & 2000 Gen 5 Fault Code:P0603 Internal Control Module Keep Alive Memory Error
Allison 1000 & 2000 Gen 5 Fault Code:P0602 TCM Not Programmed
Allison 1000 & 2000 Gen 5 Fault Code:P0563 System Voltage – High
Allison 1000 & 2000 Gen 5 Fault Code:P0562 System Voltage – Low
Allison 1000 & 2000 Gen 5 Fault Code:P0561 System Voltage – Performance

PerDieselSolution Logo

WARNING!

PerDieselSolution informs all customers and visitors that fake websites and copied domains are being used by scammers.

Please make sure you are visiting our ONLY official website:

perdieselsolution.com

We publish this notice to protect our customers from fraudulent stores and unofficial sellers.